Why do we choose UV-CTP Plate | Positive CTCP Plate? Why is it necessary? What advantages does it have?
1. Multi-layer grains, smooth coating
Multi-layer grains, smooth coating, high sensitive speed, excellent dot reappearance, large exposure and developing latitude, quick ink-water balance, long impression.
2. Abrasion-resistant grains, precise size
This section is about the design and manufacturing of abrasion-resistant grains. The material is made to resist wear and tear when it comes into contact with other materials. This is accomplished by making the particles of the material have a precise size.
Abrasion-resistant grains, precise size, excellent dot reappearance, quick ink-water balance, super long impression
3. Economical printing, high sensitive speed, perforation by international standard
Economical printing is one of the most important factors for a printing company. The high sensitive speed, perforation by international standards, and lower cost are also some of the benefits.
Printing companies have to think about the economical printing factor when they are deciding which paper to use. The high sensitive speed and perforation by international standards are also some of the benefits of offset printing.
4. Unique and Smooth Photosensitive Coating-High Sensitivity
A unique and smooth photosensitive coating is applied to the surface of a material (usually glass) to make it sensitive to light. The coating absorbs light and converts it into heat energy. which causes the material to change from a solid to a liquid. A unique and smooth photosensitive coating is applied to the surface of a material (usually glass) to make it sensitive to light. The coating absorbs light and converts it into heat energy, which causes the material to change from a solid to a liquid.
5. Rough Gas-leading Layer
The term “rough gas-leading layer” is used in the context of a gas turbine engine. The rough gas-leading layer is located between the compressor and the combustion chamber.
This section will be about the function of this layer and its location in relation to other parts of a gas turbine engine. It will also discuss what it does and why it is important for a gas turbine engine to have this part.
In general, this section will focus on what a rough gas-leading layer is, what it does, and why it's important for a gas turbine engine to have one.
A rough gas-leading layer is a thin, porous layer of metal or ceramic that is placed on the front of the combustor. It is used to delay the mixing of fuel and air until it reaches the end of the combustor, which increases efficiency and reduces emissions. The rough gas-leading layer also acts as a heat sink for heat generated by combustion in order to increase efficiency.
6. Excellent dot reproduction
Dot reproduction is an important aspect of printing and design. It is a technique that is used to reproduce the original image or artwork as accurately as possible.
There are two ways in which this can be done: by transferring the dots from the original to a new surface, or by painting dots on a new surface. The first way can be done using a variety of methods like offset printing, letterpress printing, and silk screen printing. The second way can be achieved through various painting techniques like watercolor, gouache, and airbrush.
Others also read: