PS plate (Presensitized Plate) is a popular name in the printing industry. The full name is pre-coated photosensitive lithography. The PS plate is a plate material for offset (lithographic) printing that is coated with a layer of photosensitive resin on the electrolytically roughened and anodized aluminum plate base. The photosensitive plate base uses 0.27mm and 0.14mm aluminum plates.
Click here to know more about What is PS Plate>>
Henan Huida Print-All Technology Co., Ltd. found in 2003, with almost 20 years of development, has become the largest offset plate manufacturer in China.
Main products including digital photosensitive plates and conventional plates:
1. Positive Conventional PS Plate
2. Positive Thermal CTP Plate
3. Positive CTCP Plate
4. Double Layer Thermal CTP Plate
which are widely used in the printing industry, like newspaper printing, cans printing, electronic printing, etc.
Send your message to us by the below button (SEND INQUIRY):
For better quotations, include:
- A self-introduction
- Special requests, if any
We will reply to you within 24 hours!!!
Product Type |
Positive Conventional PS Plate |
Color |
Blue |
Aluminum |
Aluminum alloy 1050/1060 standard |
Plate Thickness |
0.15/0.20/0.25/0.30/0.40mm |
Maximum Coil Width |
1350mm |
Spectral Sensitivity |
320~450nm |
Exposure Energy |
30 seconds with 3KW iodine-gallium lamp, distance: 1 meter |
Developing Condition: |
22-26℃, 25-35S |
Safe-light |
Under Yellow Light |
Resolution |
2-98% at 200lpi |
Run Length |
100,000 copies(Unbaked), 200,000 copies(Baked) *Run-Length varies with its printing conditions and imaging content, including paper,ink |
Shelf Life |
18 Months |
Storage Conditions |
Temperature 10-25℃, 40%-60% humidity Keep away from sunlight and humidity. Pack height≤1.5 meters |